AP Racing Catalogue Issue 4

100 visit www.apracing.com for installation drawings & up to date product range details METALLIC RACE CLUTCH - Ø140mm - CP6001 & CP6002 CP6001 Ø140mm, Single Plate, Sintered TECHNICAL SPECIFICATIONS Torque Capacity CP6001-CH90-SF 210Nm (155lbft) CP6001-OH90-SF 157Nm (116lbft) Release Loads Max peak worn At travel CP6001-CH90-SF 450daN 300daN CP6001-OH90-SF 375daN 250daN Set-up Height (New) CP6001-CH90-SF 21.63mm CP6001-OH90-SF 21.37mm Set-up Height (Worn) CP6001-CH90-SF 24.35mm CP6001-OH90-SF 24.13mm Clutch “Wear In” 0.75mm Weight (including driven plates) 1.8Kg Complete Assy Inertia 0.00615Kgm² Driven Plate & Hub Inertia 0.00065Kgm² Recommended Release Bearings Outer race rotates CP3457-1 or -9 Inner race rotates CP3457-11 DRIVEN PLATES Thickness New = 2.63mm Worn = 1.84mm D/Plate Types Part Number Spline Details Back to Back. Extended nose length CP3407-36FM3 x 1 1.00” x 23 CP3407-26FM3 x 1 7/8” x 20 CP3407-8FM3 x 1 29.0mm x 10 CP3407-40FM3 x 1 1.16” x 26 Other splines available, see page 116 Note: Clutch supplied less driven plates, order separately SPARE PARTS Wear Clips CP6001-102 Main Pressure Plate CP4124-103 APPLICATIONS ◘ General Use. FEATURES ◘ Single plate. ◘ Stepped or flat flywheel fixing - Stepped is inner diameter location, with optional external spigot location. ◘ Stainless steel wear clips. ◘ CP4702 mounting studs available. PART NUMBERS ◘ For Stepped Flywheels - CP6001-CH90-SF / CP6001-OH90-SF. ◘ For Flat Flywheels - CP6001-CH90-FF. ◘ Download latest issue installation drawing from : www.apracing.com APPLICATIONS ◘ General Use. FEATURES ◘ 2 Plate. ◘ Push type. ◘ Stepped or flat flywheel fixing - Stepped is inner diameter location, with optional external spigot location. ◘ Stainless steel wear clips. ◘ CP4702 mounting studs available. PART NUMBERS ◘ For Stepped Flywheels - CP6002-CH90-SF / CP6002-OH90-SF CP6002-BH90-SF. ◘ For Flat Flywheels - CP6002-CH90-FF. ◘ Download latest issue installation drawing from : www.apracing.com CP6002 Ø140mm, 2 Plate, Sintered TECHNICAL SPECIFICATIONS Torque Capacity CP6002-CH90-SF 420Nm (310lbft) CP6002-OH90-SF 314Nm (232lbft) CP6002-BH90-SF 218Nm (161lbft) Release Loads Max peak worn At travel CP6002-CH90-SF 450daN 300daN CP6002-OH90-SF 375daN 250daN CP6002-BH90-SF 210daN 140daN Set-up Height (New) CP6002-CH90-SF 28.83mm CP6002-OH90-SF 28.57mm CP6002-BH90-SF 26.80mm Set-up Height (Worn) CP6002-CH90-SF 31.58mm CP6002-OH90-SF 31.32mm CP6002-BH90-SF 29.56mm Clutch “Wear In” 0.75mm Weight (including driven plates) 2.50Kg Complete Assy Inertia 0.0086Kgm² Driven Plate & Hub Inertia 0.00013Kgm² Recommended Release Bearings Outer race rotates CP3457-1 or -9 Inner race rotates CP3457-11 DRIVEN PLATES Thickness New = 2.63mm Worn = 2.21mm D/Plate Types Part Number Spline Details Back to Back CP3414-18FM3 x 2 7/8” x 20 CP3414-10FM3 x 2 1.00” x 23 Back to Back (Extended nose length) CP3407-26FM3 x 2 7/8” x 20 CP3407-36FM3 x 2 1.00” x 23 Other splines available, see page 116 Note: Clutch supplied less driven plates, order separately SPARE PARTS Wear Clips CP6002-102 Main Pressure Plate CP4124-103 Intermediate Pressure Plates CP4124-102