AP Racing Catalogue Issue 4

101 visit www.apracing.com for installation drawings & up to date product range details METALLIC RACE CLUTCH - Ø140mm - CP6003 & CP6013 APPLICATIONS ◘ General Use. FEATURES ◘ 3 Plate. ◘ Push type. ◘ Stepped or flat flywheel fixing - Stepped is inner diameter location, with optional external spigot location. ◘ Stainless steel wear clips. ◘ CP4702 mounting studs available. PART NUMBERS ◘ For Stepped Flywheels - CP6003-CH90-SF / CP6003-OH90-SF. ◘ For Flat Flywheels - CP6003-CH90-FF. ◘ Download latest issue installation drawing from : www.apracing.com CP6003 Ø140mm, 3 Plate, Sintered TECHNICAL SPECIFICATIONS Torque Capacity CP6003-CH90-SF 630Nm (465lbft) CP6003-OH90-SF 471Nm (348lbft) Release Loads Max peak worn. At travel. CP6003-CH90-SF 450daN 300daN CP6003-OH90-SF 375daN 250daN Set-up Height (New) CP6003-CH90-SF 36.04mm CP6003-OH90-SF 35.78mm Set-up Height (Worn) CP6003-CH90-SF 38.85mm CP6003-OH90-SF 38.59mm Clutch “Wear In” 0.75mm Weight (including driven plates) 3.3Kg Complete Assy Inertia 0.0102Kgm² Driven Plate & Hub Inertia 0.00196Kgm² Recommended Release Bearings Outer race rotates CP3457-1 or -9 Inner race rotates CP3457-11 DRIVEN PLATES Thickness New = 2.63mm Worn = 2.34mm D/Plate Types Part Number Spline Details Back to Back CP3414-10FM3 x 3 1.00” x 23 CP3414-18FM3 x 3 7/8” x 20 CP3414-19FM3 x 3 1.16” x 26 CP3414-37FM3 x 3 1.25” x 10 Other splines available, see page 116 Note: Clutch supplied less driven plates, order separately SPARE PARTS Wear Clips CP4073-123 Main Pressure Plate CP4124-103 Intermediate Pressure Plates CP4124-102 CP6013 Ø140mm, 3 Plate, Sintered APPLICATIONS ◘ Endurance. FEATURES ◘ 3 Plate. ◘ Push type. ◘ Stepped flywheel fixing - Inner diameter location, with optional external spigot location. ◘ Heavy duty - Large area driven plate facings. ◘ Stainless steel wear clips. ◘ CP4702 mounting studs available. ◘ Supercedes CP4123 & CP4073 clutch families. Note - ‘I’ Drive option available as a direct replacement for CP6013, under CP8333 part number family. PART NUMBERS. ◘ 3 Plate Clutch Stepped flywheel - CP6013-CH90-SF / CP6013-OH90-SF. ◘ Download latest issue installation drawing from : www.apracing.com TECHNICAL SPECIFICATIONS Torque Capacity CP6013-CH90-SF 603Nm (444bft) CP6013-OH90-SF 450Nm (322lbft) Release Loads Max peak worn At travel CP6013-CH90-SF 540daN 300daN CP6013-OH90-SF 400daN 250daN Set-up Height (New) CP6013-CH90-SF 39.37 / 37.70mm CP6013-OH90-SF 39.11 / 37.44mm Set-up Height (Worn) CP6013-CH90-SF 42.01mm CP6013-OH90-SF 41.75mm Clutch “Wear In” - CP6013-CH 1.00mm Clutch “Wear In” - CP6013-OH 0.75mm Weight (including driven plates) Back to Back 3.63Kg Gear Driven 3.78Kg Complete Assy Inertia Back to Back 0.01264Kgm² Gear Driven 0.01287Kgm² Driven Plate & Hub Inertia Back to Back 0.0020Kgm² Gear Driven 0.0022Kgm² Recommended Release Bearings Outer race rotates CP3457-1 Inner race rotates CP3457-11 DRIVEN PLATES Thickness - For 1mm ‘Wear In’ New = 2.63mm Worn = 2.29mm D/Plate Types Part Number Spline Details Back to Back (Large area) CP3683-3FM3 x 3 1.00” x 23 CP3683-4FM3 x 3 7/8” x 20 Back to Back (Longer spline length) CP6014-9 FM3 x 2 (offset hub) 1.16” x 26 CP6014-10 FM3 x 1 (Flywheel side hub) Gear Driven CP4073-4FM3 x 1 (hub) 1.00” x 23 CP4074-6FM3 x 2 Slider plates. Other splines available, see page 116 Note: Clutch supplied less driven plates, order separately SPARE PARTS Wear Clips CP4073-123 Main Pressure Plate CP4074-104 Intermediate Pressure Plates CP4074-103