AP Racing Catalogue Issue 4

113 visit www.apracing.com for installation drawings & up to date product range details METALLIC RACE CLUTCH - Ø215mm - CP5241 & CP5242 APPLICATIONS ◘ Race / ◘ Rally. FEATURES ◘ Single Plate, push type. ◘ Stepped flywheel fixing - Inner diameter location. ◘ One piece cover and lugs. ◘ Low maintenance. ◘ CP4702 mounting studs available. ◘ Supercedes CP2861 Clutch series. PART NUMBERS CP5241-3CRV / CP5241-3GRY. ◘ Download latest issue installation drawing from : www.apracing.com CP5241 Ø215mm, Single Plate, Cerametallic Paddle TECHNICAL SPECIFICATIONS Torque Capacity CP5241-3CRV 580Nm (427lbft) CP5241-3GRY 425Nm (314lbft) Release Loads Max peak worn CP5241-3CRV 420daN CP5241-3GRY 300daN Set-up Height (New) CP5241-3CRV 40.09 / 38.23mm CP5241-3GRY 39.35 / 37.39mm Set-up Height (Worn) CP5241-3CRV 43.86mm CP5241-3GRY 43.12mm Clutch “Wear In” 0.75mm Weight (including driven plates) 4 Paddle Sprung 5.20Kg 4 Paddle Rigid 4.80Kg 6 Paddle Rigid 5.10Kg Release Bearings Outer race rotates CP3457-2 or -10 Inner race rotates CP3457-6 DRIVEN PLATES Thickness New = 8.89mm Worn = 8.10mm D/Plate Types Part Number Spline Details 4 Paddle Rigid CP5344-10 x 1 29mm x 10 CP5344-30 x 1 1.00” x 22 4 Paddle Sprung CP5354-17 x 1 1.00” x 23 CP5354-34 x 1 7/8” x 20 6 Paddle Rigid CP5346-12 x 1 1.00” x 23 CP5346-2 x 1 29mm x 21 Other splines available, see page 116 Note: Clutch supplied less driven plates, order separately SPARE PARTS Wear Clips CP5241-104 Main Pressure Plate CP5241-5 Push-off Springs x 3 CP2603-126 APPLICATIONS ◘ Race / ◘ Rally. FEATURES ◘ 2 Plate , push type. ◘ Stepped flywheel fixing - Inner diameter location. ◘ One piece cover and lugs. ◘ Low maintenance ◘ CP4702 mounting studs available. PART NUMBERS CP5242-2CRV. ◘ Download latest issue installation drawing from : www.apracing.com CP5242 Ø215mm, 2 Plate, Cerametallic Paddle TECHNICAL SPECIFICATIONS Torque Capacity 842Nm (621lbsft) Release Loads Max peak worn. 380daN Set-up Height (New) 53.84 / 51.91mm Set-up Height (Worn) 57.65mm Clutch “Wear In” 1.00mm Weight (including driven plates) 7.74Kg Complete Assembly Inertia 4 Paddle 0.063358Kgm² Driven Plate & Hub Inertia 4 Paddle 0.005833Kgm² Recommended Release Bearings Outer race rotates CP3457-2 Inner race rotates CP3457-6 DRIVEN PLATES Thickness New = 7.08mm Worn = 6.58mm D/Plate Types Part Number. Spline Details. 4 Paddle Rigid CP6180-1 x 2 1.06” x 10 CP6180-2 x 2 1.00” x 23 CP6180-3 x 2 1.00” x 24 CP6180-4 x 2 1.16” x 26 CP6180-5 x 2 1.12” x 10 Other splines available, see page 116 Note: Clutch supplied less driven plates, order separately SPARE PARTS. Wear Clips. CP4462-104 Main Pressure Plate. CP5242-10 Intermediate Pressure Plate. CP5242-11