AP Racing Catalogue Issue 3

140 Visit www.apracing.com for full & up to date product range CLUTCH MOUNTING STUD. AP Racing offer a complete range of clutch mounting studs for all of the Carbon / Carbon and Sintered / Cerametallic Race Clutches. The stud design incorporates offset head flats for location, necked down shanks and precision ground location diameters. All kits come complete with relevant K-lock nuts. When ordering first calculate the required length of stud then by using the listing on the right find that length & quote the part number in either M6, M8, 1/4” UNF or 5/16”UNF. Example part number breakdown below. CP4702 - 475 M K Stud Family Length of Stud 47.5mm Long Type of Thread M = Metric U = UNF K = kits, followed by either 06, 08 or 12 denotes the number of Studs & K-Lock Nuts (No Letter denotes single Stud) CP4702 M8 and 5/16”UNF STUD SERIES. CP4702 - PART NUMBERS. Stud Length. (Dim’n ‘L’) M8 x 1.0 (M Suffix). 5/16” UNF (U Suffix). 40.0mm CP4702-400M CP4702-400U 42.5mm CP4702-425M CP4702-425U 45.0mm CP4702-450M CP4702-450U 47.5mm CP4702-475M CP4702-475U 50.0mm CP4702-500M CP4702-500U 52.5mm CP4702-525M CP4702-525U 55.0mm CP4702-550M CP4702-550U 57.5mm CP4702-575M CP4702-575U 60.0mm CP4702-600M CP4702-600U 62.5mm CP4702-625M CP4702-625U 65.0mm CP4702-650M CP4702-650U 67.5mm CP4702-675M CP4702-675U 70.0mm CP4702-700M CP4702-700U 72.5mm CP4702-725M CP4702-725U 75.0mm CP4702-750M CP4702-750U 77.5mm CP4702-775M CP4702-775U The kits listed above are available containing 6,8 or 12 bolts, add the number of bolts required to the end of the part number. e.g. CP4702-400MK(12) CP4703 M6 and 1/4”UNF STUD SERIES. CP4703 - PART NUMBERS. Stud Length. (Dim’n ‘L’) M6 x 1.0 (M Suffix). 1/4” UNF (U Suffix). Ø ‘B’ 6.016 / 6.008mm 6.365 / 6.357mm Ø ‘C’ 5.98 / 5.95mm 6.33 / 6.30mm 40.0mm CP4703-400M CP4703-400U 42.5mm CP4703-425M CP4703-425U 45.0mm CP4703-450M CP4703-450U 47.5mm CP4703-475M CP4703-475U 50.0mm CP4703-500M CP4703-500U 52.5mm CP4703-525M CP4703-525U 55.0mm CP4703-550M CP4703-550U 57.5mm CP4703-575M CP4703-575U 60.0mm CP4703-600M CP4703-600U 62.5mm CP4703-625M CP4703-625U 65.0mm CP4703-650M CP4703-650U 67.5mm CP4703-675M CP4703-675U 70.0mm CP4703-700M CP4703-700U 72.5mm CP4703-725M CP4703-725U 75.0mm CP4703-750M CP4703-750U The kits listed above are available containing 6,8 or 12 bolts, add the number of bolts required to the end of the part number. e.g. CP4703-400MK(12) ORDERING. 5.05 4.95 6.05 5.95 Ø15.0 3.10 2.90 0.50 0.25 R 8.024 8.015 Ø 8.01 8.00 Ø 14.0 CHM’F 0.6 0.5 x 45° ‘ L’ ±0.25 18.0 11.0 MIN FULL THREAD ROLLED THREAD Ø13.6 Ø13.21 7.0 10.0 9.46 6.76 M8x1.0 KAYLOCK NUT PART No. CP4702-106 5/16”UNF KAYLOCK NUT PART No. CP4702-176 CLUTCH MOUNTING STUDS - CP4702 & CP4703 Note: Drawing for guidance only. Download latest issue installation drawing from www.apracing.com Note: Drawing for guidance only. Download latest issue installation drawing from www.apracing.com

RkJQdWJsaXNoZXIy NTU4MjY=