AP Racing Catalogue Issue 4

73 visit www.apracing.com for installation drawings & up to date product range details CP4709 TYPE A small diameter plastic reservoir with central outlet, which can be screwed directly into a master cylinder. - Features ◘ Available in a choice of 3 volumes. ◘ ‘O’ Ring seal supplied. ◘ CP2709-156 Bellows available separately , not included with reservoir. ◘ Push on & threaded connector for remote cylinders available. Part No is CP4709-107. - Part Numbers ◘ CP4709-10,-11 & -12 Will screw directly onto CP2623, CP4623, CP5623 and CP6093 cylinders by removing inlet adaptor. ◘ Note: For fitting instructions refer to leaflet P14.073 or see website. ◘ CP4709-13,-14 & -15 are for remote use, but will fit directly to CP4400 master cylinders. ◘ CP4709- 16 & -17 are for remote use only. ◘ CP4709- 19,-20 & -21 reservoir with push on outlet, for remote use only. IMPORTANT NOTE: CP4709-12 /-13 /-16 & -19 small reservoirs have no bellows to suit, please use CP4709-25 Catch Tank Kit. CP5709-10 ◘ A remote plastic reservoir, accepts Ø5/16” hose. ◘ Complete with heavy duty cable tie & nylon saddle. ◘ Volume = 185cm³ (11.3in³) ◘ No Diaphragm available. ◘ Replaces 112009 Reservoir. Type Reservoir Part No. Volume CC’s Dim’n ‘L’ (mm) Thread Size Basic + Bellows Tall CP4709-10 170 155 169 15/16” x 20 UNS - Direct Fit - Medium CP4709-11 110 95 119 Short CP4709-12 65 N/A 79 Short CP4709-13 65 N/A 96 7/16” x 20 UNF - Remote - Medium CP4709-14 110 95 136 Tall CP4709-15 170 155 186 Short CP4709-16 65 N/A 96 M12 x 1.0 - Remote - Medium CP4709-17 110 95 136 Short CP4709-19 65 N/A 94 PUSH ON ADAPTOR - Remote - Medium CP4709-20 110 95 134 Tall CP4709-21 170 155 184 INTRODUCTION AP Racing offer a comprehensive range of plastic reservoirs. The reservoirs detailed on pages 73 & 74 complement not only our own Master Cylinders, but other manufacturers also. Full installation drawings can be downloaded from: www.apracing.com Ø66 Ø51 12 MIN SPACE TO REMOVE CAP ASSEMBLY COMES COMPLETE WITH HEAVY DUTY CABLE TIE AND NYLON SADDLE FOR RESERVOIR MOUNTING MOUNTING HOLE TO SUIT 6mm CHEESEHEAD SCREW (NOT SUPPLIED) 18 78 17 Ø11.6 ACCEPTS Ø5/16” HOSE CP4773 TYPE ◘ CP4773 reservoir capacity is midway between CP4709 and CP2293-141/3 types. Both assemblies have an offset outlet and are fitted with bellows (CP4773-102). ◘ Volume = 195cm³. ◘ Part Numbers: - CP4773-1 (7/16”UNF outlet). - CP4773-2 (M12 outlet). - CP4773-3 (Push on Fitting). DIMN ‘L’ 12.0 MIN SPACE TO REMOVE CAP Ø44.00 ‘M’ THREAD SIZE Ø51.00 O-RING SEAL SUPPLIED WITH ALL RESERVOIRS CP4709-25 - CATCH TANK KIT CP4709-25 catch tank is an alternative fluid surge system to traditional bellows, without compromising reservoir capacity. CP4709-25 is suitable for all AP Racing reservoirs and can be used in all competition formulae. The kit comprises of: - 1 x catch tank. - 75cm of silicone tube. - 3 x nipples with washers & nuts. - 1 x T-Connector. - 2 x Cable ties. - 4 x Mounting blocks. NOTE: For installation & fitting details refer to, http://www.apracing.com/drawings/cp4709-25cd-iss1.pdf OUTLET THREAD 16.00 MIN SPACE TO REMOVE CAP 113.00 100.40 Ø63.25 MAX CP4773-2 CP4773-3 CP4773-1 16.00 OFFSET COPPER GASKET AND O-RING SEAL SUPPLIED WITH ASSEMBLY FLUID RESERVOIRS Note: Drawing for guidance only. Download latest issue installation drawing from www.apracing.com Note: Drawing for guidance only. Download latest issue installation drawing from www.apracing.com Note: Drawing for guidance only. Download latest issue installation drawing from www.apracing.com