AP Racing Catalogue Issue 4

75 visit www.apracing.com for installation drawings & up to date product range details INTRODUCTION AP Racing’s range of pedal boxes are proving to be masterpieces of functional design. Our pedal boxes represent a major step forward in chassis control, giving driver better feel, greater dexterity, quicker laps. All pedal boxes are lightweight, flexible and ergonomically efficient, these multi-ratio pedal boxes are designed to harmonise with the complete range of master cylinders available from AP Racing. PEDAL BOXES - Floor Mounted - CP5500 & CP5509 Types CP5500 family is a generic racing pedal box, designed for comfort and control. The 3 pedal assembly CP5500-605 has been updated to include a new contactless rotary throttle sensor with dual input/output for redundancy. This family of pedal boxes benefits from optimised, machined billet base plate and pedals, with adjustable footpads to alter pedal ratios. The throttle pedal includes travel stops and additional features to aid connection to bell cranks and cables. All pedal pivots feature ball bearings. The base plate and pedals, together with low friction treatments and a high quality spherical balance bar bear- ing, set high standards in pedal box efficiency. The CP5500 range is also available in 3, 2 and 1 pedal configurations. PART NUMBERS ◘ Brake, Clutch & Throttle Assembly: - With throttle sensor - CP5500- 605MTS or CP5500-605UTS. - Without throttle sensor - CP5500- 605M or CP5500-605U. ◘ Brake & Throttle Assembly: - With throttle senso r - CP5500- 625MTS or CP5500-625UTS. - Without throttle sensor - CP5500- 625M or CP5500-625U. ◘ Brake & Clutch Assembly - CP5500- 515MET or CP5500-515UNF. ◘ Brake Pedal Assembly - CP5500- 535MET or CP5500-535UNF. ◘ Note: UNF & UTS Assemblies - The only threads that are imperial are the three clevis’s that attach to the master cylinder pushrods. ◘ Download latest issue installation drawing from : www.apracing.com FEATURES ◘ Optimised, lightweight Aluminium alloy base plate, machined from Billet. ◘ Optimised, lightweight billet clutch and brake pedal, with improved twist resistance. ◘ Forged throttle pedal with additional features. - Adjustable forward & rear stops. - Return spring. - 9 Different footpad positions. - Side Plate. ◘ Optional throttle linkage kit - CP5500-43. ◘ Brake and clutch pedal ratio 4.85:1. ◘ All pedals pivot on ball bearings. ◘ Suitable master cylinder ranges - CP2623, see page 64. ◘ Recommended push rod length - brake 88.0mm. / - clutch 65.0mm. ◘ Adjuster cable CP2905-18 included. ◘ 10mm balance bar, fitted with rubber boots to prevent dirt ingress. ◘ Supercedes CP5500-505 CP5500 Floor Mounted Push Types This is a general purpose, floor mounted pedal box, which utilises the latest high efficiency CP7854 push type master cylinders. Minimum hysteresis and balance variation are assured by the use of needle roller bearings in the centre trunnion and ball bearing pedal pivots. PART NUMBERS ◘ Brake and clutch assembly - CP5509-1 ◘ Download latest issue installation drawing from : www.apracing.com FEATURES ◘ Lightweight billet base, machined from Aluminium. ◘ Includes billet aluminium alloy Pedals and Balance Bar. ◘ Adjustable foot pads for optimum driver comfort. ◘ Adjustable clutch stop. ◘ Brake and clutch pedal ratio 4.8:1. ◘ Brake and clutch pedal are pivoted on ball bearings, for increased efficiency and smoothness. ◘ Designed for use with master cylinder CP7854 see page 65. ◘ Travel sensor kit CP5854-10 available for the master cylinders used with this pedal box. ◘ Weight - without cylinders 1.75kg ◘ Adjuster cable CP2905-18 included with assembly. CP5509 - Two Pedal Floor Mounted Push Type