AP Racing Catalogue Issue 4

82 visit www.apracing.com for installation drawings & up to date product range details HYDRAULIC FITTINGS BLEEDSCREWS BANJO’S RESERVOIR ADAPTORS COPPER GASKETS KL44517 ‘A’ 14.2 (0.56”) ‘B’ 10.2 (0.40”) ‘C’ 2.0 (0.08”) KL44518 ‘A’ 17.5 (0.69”) ‘B’ 11.1 (0.44”) ‘C’ 1.6 (0.06”) KL44519 ‘A’ 20.3 (0.80”) ‘B’ 12.9 (0.51”) ‘C’ 1.6 (0.06”) KL44520 ‘A’ 17.0 (0.67”) ‘B’ 12.9 (0.51”) ‘C’ 1.22 (.048”) KL44539 ‘A’ 29.5 (1.16”) ‘B’ 24.1 (0.95”) ‘C’ 1.22 (.048”) INLET FITTINGS Special inlet fittings for CP6465 Master Cylinder. Note: These fittings are sold in kits complete with keeper plate, retaining screw & ‘O’ Ring. CP6465-10 75° Angle Fitting Kit CP3720-107 M10 x 1.0 With lockwire hole. CP3880-1 M10 x 1.0 Sealed bleed screw-kit. Kit is 2 x CP4970-125 & 2 x CP4970-124. CP3880-2 3/8” x 24UNF Sealed bleed screw-kit. Kit is 2 x CP5820-123 & 2 x CP6297-111. Single ◘ CP2703 - 3/8”x24UNF ◘ CP2677 - M10 x 1.0 Double ◘ CP2673 - 3/8”x24UNF ◘ CP2674 - M10 x 1.0 Steel Braided CP2672 - For -3 Steel braided hose ADAPTORS & ADAPTOR KITS CP2270-16 3/8” x 24UNF flat seat & convex seat adaptor. CP2554-108 M10 x 1.0 flat seat & 3/8” x 24UNF convex seat adaptor. CP2451 3/8” x 24UNF flat seat & 1/8” BSP concave seat adaptor. Push-on Adaptor Kit ◘ CP2623-30 - 7/16” UNF ◘ CP4623-2 - M12 x 1.0 accepts 7.9mm (5/16”) inside Ø hose Push-on Banjo Adaptor Kit ◘ CP2623-41 - 7/16” UNF ◘ CP4623-6 - M12 x 1.0 accepts 7.9mm (5/16”) inside Ø hose ◘ CP2623-526 ‘A’ = 7/16” UNF, For CP2709-10/ -15/ -16 & CP2293-141/ -143 Reservoirs. Push-on Adaptor CP2623-250 Use with ‘O’ Ring CP6116-109 ◘ CP6614-106 / ‘L’ = 609mm (24”) ◘ CP6614-102 / ‘L’ = 1828mm (72”) ◘ CP6614-103 / ‘L’ = 305mm (12”) CP2020-1 To suit outside Ø9.5mm to 13mm. RESERVOIR OUTLETS Outlets for CP4709 type fluid reservoirs. CP4709-105 7/16”UNF Use with ‘O’ Ring CP4709-104 CP4709-106 M12 x 1.0 Use with ‘O’ Ring CP4709-104. CP4709-107 Push-on Use with ‘O’ Ring CP4709-104. CP6465-11 Straight Fitting Kit CP6465-12 90° Angle Fitting Kit CP3720-173 M10 x 1.0 CP3720-182 3/8” x 24UNF CP4469-101 M7 x 1.0 ◘ CP4623-107 ‘A’ = M12 x 1.0 ,For CP4623-4/ -5/ -7/ -8 Reservoirs. Use with ‘O’ Ring CP6116-109 REMOTE HOSE AND CLIP ‘O’ RING (SEALED) BLEED SCREWS ‘O’ Ring bleed screws are designed to prevent fluid leakage during bleeding, in conjunction with a specially designed bleed screw port. Now standard fitment on all recent AP Racing caliper designs. AP Racing offer two bleed screws and two o-rings in a kit see details opposite. CP6160-107 M10 x 1.0 flat seat & 3/8” x 24UNF convex seat adaptor. For replacing an ‘O’ Ring type bleed screw. ‘L’ 7.31/7.01mm 10.01 9.31 / mm