AP Racing Catalogue Issue 4

90 visit www.apracing.com for installation drawings & up to date product range details CARBON / CARBON CLUTCH - Ø184mm Push Types - CP8039 & CP8792 TYPICAL APPLICATIONS ◘ Designed for front wheel drive Touring car applications. ◘ NOTE: For high torque launch applications, i.e. Rear wheel drive cars, use 12 Station cushion pressure plated clutch CP8032 , which has a higher cushion rate for the same torque capacity as CP8039. See website for details. FEATURES ◘ 12 Bolt, One piece Aluminium cover and lugs. ◘ 6 Station cushion pressure plated fitted. ◘ Steel pressure plate. ◘ Heavy & Normal duty carbon stack options. ◘ Very high ratio (VHR) option only. ◘ Stepped flywheel fixing - inner diameter location. ◘ Supercedes CP8032 Assemblies. AVAILABLE OPTIONS ◘ Two diaphragm spring variants - C (CRV) or O (ORA). ◘ Three Cover / Pressure plate material & carbon type variants - (01) Aluminium / Steel & normal duty / (02) Aluminium / Steel & heavy duty / (22) Aluminium / Steel & medium duty. ◘ Flywheel Options - SN , Standard stepped / SP , Stepped with CPS, (Cushion Pressure Plate System). SAMPLE PART NUMBERS ◘ 2 Plate, Stepped flywheel with cushion pressure plate - CP8039-OV02-SP ◘ ‘P’ suffix denotes cushion pressure plate using fulcrum ring type pressure plate. Other part numbers available, please refer to customer installation drawing or contact AP Racing technical department. ◘ Download latest issue installation drawing from : www.apracing.com CP8039 Ø184mm, 12 Bolt, Push Type TECHNICAL SPECIFICATIONS FOR CP8039-OV02-SP ONLY Torque Capacity 629Nm (463lbft) “Wear In” between P/Plate changes 1.20mm Total allowable carbon stack wear 4.0mm Release Loads Max peak worn. 415daN At travel. 295daN Set-up Height (New) 33.24 / 31.81mm Set-up Height (Worn) 37.91mm Weight 2.97Kg Complete Assy Inertia 0.017689Kgm² Driven Plate & Hub Inertia 0.00253Kgm² FULCRUM RING SHIMS Ratio VHR Material Stainless Steel Fulcrum Plate Kits .5mm to 2.5mm (0.5mm Steps) = CP8032-8 .25mm to 2.75mm (0.5mm Steps) = CP8032-9 HUB OPTIONS Material Steel 1.00” x 23 CP7832-120S 25.5” x 25 CP7832-121S More hubs are available with other spline sizes, contact AP Racing. RELEASE BEARING OPTIONS Outer Race Rotates CP3457-19 TYPICAL APPLICATIONS ◘ Touring Car. FEATURES ◘ 6 Bolt, one piece Aluminium cover and lugs. ◘ Steel pressure plate. ◘ Push type. ◘ Very High Ratio (VHR) option only. ◘ Stepped flywheel fixing - inner diameter location. ◘ Cushion pressure plate fitted. AVAILABLE OPTIONS ◘ Two diaphragm spring variants - O (ORA) / C (CRV). ◘ Two Cover / Pressure plate material & carbon type variants - (01) Aluminium/Steel & Normal Duty / (22) Aluminium / Steel & Medium Duty. ◘ Flywheel options - SN , Standard stepped / SP , Stepped with CFS, (Cushion Flywheel System). SAMPLE PART NUMBER ◘ Single Plate, Stepped flywheel with cushion pressure plate. - CP8792-OV22-SP. - ‘P’ Suffix denotes cushion pressure plate using fulcrum ring type pressure plate. - Other part numbers available, please refer to customer installation drawing or contact AP Racing technical department. ◘ Download latest issue installation drawing from : www.apracing.com CP8792 Ø184mm, 6 Bolt, Push Type TECHNICAL SPECIFICATIONS FOR CP8792-OV22-SP ONLY Torque Capacity 741Nm (546lbft) “Wear In” between P/Plate changes 1.25mm Total allowable carbon stack wear 4.0mm Release Loads Max peak worn 445daN Max peak new 375daN Set-up Height (New) 31.57 / 30.04mm Set-up Height (Worn) 36.24mm Weight - (inc hub & Steel Main P/Plate) 2.4Kg Complete Assy Inertia 0.01384Kgm² Driven Plate & Hub Inertia 0.002215Kgm² FULCRUM RING SHIMS Ratio VHR Material Stainless Steel Fulcrum Plate Kits .5mm to 2.5mm (0.5mm Steps) = CP8032-8 .25mm to 2.75mm (0.5mm Steps) = CP8032-9 HUB OPTIONS Material Steel 1.00” x 23 CP8972-105S 25.5mm x 24 CP8972-106S More hubs are available with other spline sizes, contact AP Racing. RELEASE BEARING OPTIONS Outer Race Rotates CP3457-19